Cure kinetics of ring-opening metathesis polymerization of dicyclopentadiene

The cure kinetics of polydicyclopentadiene (pDCPD) prepared by ring-opening metathesis polymerization with three different concentrations of Grubbs' catalyst was examined using differential scanning calirimetry (DSC). The experimental data were used to test several different phenomenological kinetic models. The data are best modeled with a "model-free" isoconversional method. This analysis reveals that the activation energy increases significantly for degree of cure greater than 60%. Catalyst concentration is shown to have a large effect on the cure kinetics.published or submitted for publicationis peer reviewe

Solar tracking system

A solar tracker for a solar collector is described in detail. The collector is angularly oriented by a motor wherein the outputs of two side-by-side photodetectors are discriminated as to three ranges: a first corresponding to a low light or darkness condition; a second corresponding to light intensity lying in an intermediate range; and a third corresponding to light above an intermediate range, direct sunlight. The first output drives the motor to a selected maximum easterly angular position; the second enables the motor to be driven westerly at the Earth rotational rate; and the third output, the separate outputs of the two photodetectors, differentially controls the direction of rotation of the motor to effect actual tracking of the Sun

Solar tracking control system Sun Chaser

The solar tracking control system, Sun Chaser, a method of tracking the Sun in all types of weather conditions is described. The Sun Chaser follows the Sun from east to west in clear or cloudy weather, and resets itself to the east position after sundown in readiness for the next sunrise

A generative model for feedback networks

We investigate a simple generative model for network formation. The model is designed to describe the growth of networks of kinship, trading, corporate alliances, or autocatalytic chemical reactions, where feedback is an essential element of network growth. The underlying graphs in these situations grow via a competition between cycle formation and node addition. After choosing a given node, a search is made for another node at a suitable distance. If such a node is found, a link is added connecting this to the original node, and increasing the number of cycles in the graph; if such a node cannot be found, a new node is added, which is linked to the original node. We simulate this algorithm and find that we cannot reject the hypothesis that the empirical degree distribution is a q-exponential function, which has been used to model long-range processes in nonequilibrium statistical mechanics.Comment: 11 pages, 6 figure

Fatigue crack propagation in microcapsule toughened epoxy

The addition of liquid-filled urea-formaldehyde (UF) microcapsules to an epoxy matrix leads to significant reduction in fatigue crack growth rate and corresponding increase in fatigue life. Mode-I fatigue crack propagation is measured using a tapered doublecantilever beam (TDCB) specimen for a range of microcapsule concentrations and sizes: 0, 5, 10, and 20% by weight and 50, 180, and 460 micron diameter. Cyclic crack growth in both the neat epoxy and epoxy filled with microcapsules obeys the Paris power law. Above a transition value of the applied stress intensity factor, which corresponds to loading conditions where the size of the plastic zone approaches the size of the embedded microcapsules, the Paris law exponent decreases with increasing content of microcapsules, ranging from 9.7 for neat epoxy to approximately 4.5 for concentrations above 10 wt% microcapsules. Improved resistance to fatigue crack propagation, indicated by both the decreased crack growth rates and increased cyclic stress intensity for the onset of unstable fatigue-crack growth, is attributed to toughening mechanisms induced by the embedded microcapsules as well as crack shielding due to the release of fluid as the capsules are ruptured. In addition to increasing the inherent fatigue life of epoxy, embedded microcapsules filled with an appropriate healing agent provide a potential mechanism for self-healing of fatigue damage.published or submitted for publicationis peer reviewe

In situ poly(urea-formaldehyde) microencapsulation of dicyclopentadiene

Microencapsulated healing agents that possess adequate strength, long shelf-life, and excellent bonding to the host material are required for self-healing materials. Ureaformaldehyde microcapsules containing dicyclopentadiene were prepared by in situ polymerization in an oil-in-water emulsion that meet these requirements for self-healing epoxy. Microcapsules of 10-1000 ??m in diameter were produced by appropriate selection of agitation rate in the range of 200-2000 rpm. A linear relation exists between log(mean diameter) and log(agitation rate). Surface morphology and shell wall thickness were investigated by optical and electron microscopy. Microcapsules are composed of a smooth 160-220 nm inner membrane and a rough, porous outer surface of agglomerated urea-formaldehyde nanoparticles. Surface morphology is influenced by pH of the reacting emulsion and interfacial surface area at the core-water interface. High yields (80-90%) of a free flowing powder of spherical microcapsules were produced with a fill content of 83-92 wt% as determined by CHN analysis.published or submitted for publicationis peer reviewe

Cold dark matter models with high baryon content

Recent results have suggested that the density of baryons in the Universe, OmegaB, is much more uncertain than previously thought, and may be significantly higher. We demonstrate that a higher OmegaB increases the viability of critical-density cold dark matter (CDM) models. High baryon fraction offers the twin benefits of boosting the first peak in the microwave anisotropy power spectrum and of suppressing short-scale power in the matter power spectrum. These enable viable CDM models to have a larger Hubble constant than otherwise possible. We carry out a general exploration of high OmegaB CDM models, varying the Hubble constant h and the spectral index n. We confront a variety of observational constraints and discuss specific predictions. Although some observational evidence may favour baryon fractions as high as 20 per cent, we find that values around 10 to 15 per cent provide a reasonable fit to a wide range of data. We suggest that models with OmegaB in this range, with h about 0.5 and n about 0.8, are currently the best critical-density CDM models.Comment: 14 pages, LaTeX, with 9 included figures, to appear in MNRAS. Revised version includes updated references, some changes to section 4. Conclusions unchange

Neuropsychological and functional outcomes in recent-onset major depression, bipolar disorder and schizophrenia-spectrum disorders: a longitudinal cohort study

Functional disability is the lead contributor to burden of mental illness. Cognitive deficits frequently limit functional recovery, although whether changes in cognition and disability are longitudinally associated in recent-onset individuals remains unclear. Using a prospective, cohort design, 311 patients were recruited and assessed at baseline. One hundred and sixty-seven patients met eligibility criteria (M = 21.5 years old, s.d. = 4.8) and returned for follow-up (M = 20.6 months later, s.d. = 7.8). Two-hundred and thirty participants were included in the final analysis, comprising clinically stable patients with major depression (n = 71), bipolar disorder (BD; n = 61), schizophrenia-spectrum disorders (n = 35) and 63 healthy controls. Neuropsychological functioning and self-rated functional disability were examined using mixed-design, repeated-measures analysis, across diagnoses and cognitive clusters, covarying for relevant confounds. Clinical, neuropsychological and functional changes did not differ between diagnoses (all P40.05). Three reliable neuropsychological subgroups emerged through cluster analysis, characterized by psychomotor slowing, improved sustained attention, and improved verbal memory. Controlling for diagnosis and changes in residual symptoms, clusters with improved neuropsychological functioning observed greater reductions in functional disability than the psychomotor slowing cluster, which instead demonstrated a worsening in disability (Po0.01). Improved sustained attention was independently associated with greater likelihood of follow-up employment (Po0.01). Diagnosis of BD uniquely predicted both follow-up employment and independent living. Neuropsychological course appears to be independently predictive of subjective and objective functional outcomes. Importantly, cognitive phenotypes may reflect distinct pathophysiologies shared across major psychiatric conditions, and be ideal targets for personalized early intervention

Assessment of Composite Delamination Self-Healing Via Micro-Encapsulation

Composite skin/stringer flange debond specimens manufactured from composite prepreg containing interleaf layers with a polymer based healing agent encapsulated in thin walled spheres were tested. As a crack develops and grows in the base polymer, the spheres fracture releasing the healing agent. The agent reacts with catalyst and polymerizes healing the crack. In addition, through-thickness reinforcement, in the form of pultruded carbon z-pins were included near the flange tips to improve the resistance to debonding. Specimens were manufactured with 14 plies in the skin and 10 plies in the stiffener flange. Three-point bend tests were performed to measure the skin/stiffener debonding strength and the recovered strength after healing. The first three tests performed indicated no healing following unloading and reloading. Micrographs showed that delaminations could migrate to the top of the interleaf layer due to the asymmetric loading, and hence, bypass most of the embedded capsules. For two subsequent tests, specimens were clamped in reverse bending before reloading. In one case, healing was observed as evidenced by healing agent that leaked to the specimen edge forming a visible "scar". The residual strength measured upon reloading was 96% of the original strength indicating healing had occurred. Hence, self-healing is possible in fiber reinforced composite material under controlled conditions, i.e., given enough time and contact with pressure on the crack surfaces. The micro-encapsulation technique may prove more robust when capsule sizes can be produced that are small enough to be embedded in the matrix resin without the need for using an interleaf layer. However, in either configuration, the amount of healing that can occur may be limited to the volume of healing agent available relative to the crack volume that must be filled